Edwards vacuum Vacuum pump products Vacuum pump services & repairs Vacuum spares and vacuum parts Vacuum manufacturers
Home About Absolute Vacuum Vacuum pump resources Contact Absolute Vacuum Newsletter Modulyo Freeze Drying

Edwards (formerly BOC Edwards) Vacuum Gauges and Vacuum Calibration

Edwards AGD Active Gauge Display

The BOC Edwards Active Gauge Displays are a range of simple, low cost units for the measurement and control of vacuum from atmosphere to 10-9 mbar. They are designed for use with BOC Edwards gauges and there- fore give the user unrivalled performance, flexibility and ease of use with this range of vacuum instruments.
Now includes Pa as well as mbar / Torr versions.

Edwards AGD Active Gauge Display

Features & benefits

Accepts two active gauge beads
- Single switch with LED indication for puge head selection .
Option of two adjustable set-points with relay status indication
- Two single pole change-over relays each rated at 3 A 250 V .
Standard 2 to 10 V d.c. analogue chart recorder outputs
- Continuous independent output for each gauge head plus switched output corresponding to selected gauge head .
Bench top use or panel mounting
- Supplied with tilt feet for convenient bench top mounting and panel mounting kit to DIN 43700 standard .
Mains power input via IEC connector
- Fuse and voltage selector allows operation from 90 to 265 V a.c., 45 to 70 Hz
Continuous reading - no range changing necessary
- Clear analog display covers the whole purge head pressure range ln addition to the features of the unit itself, use of the Active Gauge Display gives all the benefits of Active gauging.

These include flexible cabling with standard lengths up to 100 m, a high level of immunity to electrical noise and ruled compact surface mount electronics.

Edwards AGD Active Gauge Display

Edwards AGD Active Gauge Display

TECHNICAL DATA

Power Supply
Input voltage range: 90 to 120 V a.c.
185 to 265 V a.c. (selectable)
Input frequency range: 45 to 70 Hz
Temperature range
Operating: 5 to 60 C
Storage: -10 to + 70C

Chart recorder outputs 2 to 10 V d.c.
Relays
Voltage (maximum): 250 V a.c.
Current (maximum) 3 A (non-inductive load)
Dimensions: DIN 43700 standard 96 x 96 mm
Standards
Electronic design: EN 61010-1
Electromagnetic compatibility: EN61326 (Class B Emissions)

Edwards AGD Active Gauge Display

Examples of compatible gauges

Edwards AGD Active Gauge Display +

Active Pirani Gauges
APG-M & APG-MP
Atmosphere to 10-3 mbar
APG-L
Atmosphere to 10-4 mbar

Edwards AGD Active Gauge Display +

Active Linear Tirana Gauges
APGX-H
1333 to 3 x 10-4 mbar
APGX-M & APGX-MP
Atmosphere to 10-3 mbar
APGX-L
Atmosphere to 10-4 mbar

Edwards AGD Active Gauge Display +

Active Thermocouple Gauges
ATC-D
65 to 6.5 x IQQ mbar
ATC-M
1.3 to 1.3 x 10-3 mbar

Edwards AGD Active Gauge Display +

Active Inverted Magnetron Gauges
AIMS, AIM-SL & AIM-X
10-2 to 10-9 mbar
Active Wide Range Gauges
WRG-S, WRG-SL & WRG-D
Atmosphere to 10-9 mbar
Ordering Information

Edwards AGD Active Gauge Display

Product Description

Edwards AGD Active Gauge Display

Ordering Number

AGD for APG-M with control relays (mbar/Torr)
AGD for APG-M with control relays (Pa)
AGD for APG-L with control relays (mbar/Torr)
AGD for APG-L with control relays (Pa)
AGD for APGX with control relays (mbar/Torr)
AGD for APGX with control relays (Pa)
AGD for AIM-S with control relays (mbar/Torr)
AGD for AIM-S with control relays (Pa)
AGD for AIM-X with control relays (mbar/Torr)
AGD for AIM-X with control relays (Pa)
AGD for ATC-M with control relays (mbar/Torr)
AGD for ATC-M with control relays (Pa)
AGD for ATC-D with control relays (mbar/Torr)
AGD for ATC-D with control relays (Pa)
AGD for WRG with control relays (mbar/Torr)
AGD for WRG with control relays (Pa)
AGD for APG-M (mbar/Torr)
AGD for APG-M (Pa)
AGD for APG-L (mbar/Torr)
AGD for APG-L (Pa)
AGD for APGX (mbar/Torr)
AGD for APGX (Pa)
AGD for AIM-S (mbar/Torr)
AGD for AIM-S (Pa)
AGD for AIM-X (mbar/Torr)
AGD for AIM-X (Pa)
AGD for ATC-M (mbar/Torr)
AGD for ATC-M (Pa)
AGD for ATC-D (mbar/Torr)
AGD for ATC-D (Pa)
AGD for WRG (mbar/Torr)
AGD for WRG (Pa)

D39560000
D39560600
D39561000
D39561600
D39571000
D39571600
D39562000
D39562600
D39570000
D39570600
D39563000
D39563600
D39564000
D39564600
D39580000
D39580600
D39565000
D39565600
D39566000
D39566600
D39567000
D39567600
D39568000
D39568600
D39575000
D39575600
D39576000
D39576600
D39569000
D39569600
D39585000
D39585600

Edwards AGD Active Gauge Display Product Description	Edwards AGD Active Gauge Display Ordering Number
Cables (include FCC68/RJ45 compatible connectors at both ends) 0.5m active gauge cable 1m active gauge cable 3m active gauge cable 5m active gauge cable 10m active gauge cable 15m active gauge cable 25m active gauge cable 50m active gauge cable 100m active gauge cable Mains Cables 2m UK plug 2m USA plug 2m Northern European plug	D4001005 D4001010 D4001030 D4001050 D4001100 D4001150 D4001250 D4001500 D4001999 D40013025 D40013120 D40013030